Filter change and cleaning at BLANCO drink.systems

A step-by-step guide

Here you will find 5 steps for changing and cleaning filters on BLANCO drink.systems, such as CHOICE.All. Find out how to prepare the system, clean it and insert the new filter. We also offer you instructions in pictures, a video tutorial and information about the BLANCO UNIT app. If you have any questions, contact our customer service or visit the BLANCO Shop for new cleaning tabs.

1. Preparations

  • 'Clean' and 'Filter' symbols flash when cleaning or filter change is necessary
  • Order a new filter and a BWT Easy Care Tab in good time
  • The system must be cleaned every six months or after three weeks of non-use
  • Check the remaining CO₂ capacity if (< 20 %) change cylinders

CHOICE.All

2. Remove the old filter

  • Open the front flap
  • Tilt the old filter forward and unscrew it anti-clockwise and remove it
  • Position the swivel arm over the sink, the device remains switched on and connected to the water supply

Changing filter

3. Cleaning the system

  • Prepare and insert EasyCare Adapter and EasyCare Tab (clockwise)
  • Press 'Clean' button, press 'OK' for 3 seconds, confirm 'INSTAL' display
  • Tanks are emptied (~60 min.), do not drink rinsed water

EasyCare Adapter

4. Inserting a new filter

  • When 'Filter INSTAL' appears, remove adapter and tab (anticlockwise)
  • Insert the new filter straight and screw it clockwise until the thread is no longer visible
  • Confirm filter with 'OK', enter filter capacity manually (note local water hardness & filter instructions)

Inserting a new filter

5. FINISH

  • Cleaning program runs automatically, remaining time in the display
  • After completion, remaining filter life = 99%, system ready for operation