BLANCO METRA 9
- With 2 × 3½" basket strainer wastes
- Bowl(s) depth 190/190mm
- Cabinet width minimum 90cm
- Cut out size 840 x 480
- LGA approved
|Colour/material||LH bowl||RH bowl|
|Alumetallic||BL 467 302|
|Anthracite||BL 467 301|
|Champagne||BL 467 303|
|Coffee||BL 467 304|
|Jasmin||BL 467 300|
|Pearl grey||BL 467 307|
|Rock grey||BL 467 306|
|Tartufo||BL 467 305|
|White||BL 467 299|
- Left hand bowl only
- German warehouse stock. Allow 10 working days.
|Description||Finish||LH part no||RH part no|
|Food board||wood||BL 218 313||Crockery basket and stack||s/steel||BL 507 829||Colander||s/steel||BL 215 650|
For additional convenience, we provide cut out data in three file formats – DXF, DWG and PLT – for programming specialist CNC machines. Before downloading these files, it is important to understand that the actual cut out details quoted are the same as the bowl rim – i.e. a cut out made using the data will be flush to the bowl sides (within published tolerances).
If it is desirable for the material to overhang the bowl sides, the cut out dimensions will require size adjustment to leave the overhang. For half bowls provided with colanders, a flush fit will be necessary to allow the colander to rest on the work surface. We therefore strongly advise that, before cutting any material, a check be made with the customer to ensure that all details concerning cut outs are correct. Please note that some sinks are handed; it may therefore be necessary in some cases to establish the handing.
The dimensions provided on this site are provided in good faith, and BLANCO Ltd will not be held responsible for any misinterpretation or errors in transferring the cut out details and the requirements of an individual customer.
By downloading cutout files from this page, you confirm that you have read the above notes and agree to accept any liability that may occur.